After the Mixture Has Been Prepared by All Irregularites, and Large Holes on the Ceiling Shoup Bealed with A Narrow and Small Spatula. When The Ceiling Dries, You Can Apply the Starting Layer of Putty. The mixture is applied with a hallf. The Thickness of the Applied Layer Shoup Not Exched One Centimeter. Distribute the Mixture with Uniform Movements. As Soon As the Starting Layer Was Applied to the Surface of the Ceiling, ImmediaTely Proceded to Applying the Finish Layer. In Indoor Conditions, The Starting Layer Dries for ABOUT FUR — Six Hours. To Apply the Finish Layer, Use A Wide Spatula to Get a Fairly Even Surface. The MIXTURA is applied Neatly and Slowly, Removing the Excess. AFTER The CEILING IS COMPLETELY DRY, Polish The Surface of A Specially Designed Abrasive Mesh for this. You can walk on the surface AGAIN, Destroying Irregularites, After the Grinding Was Completed