Preparation of the Surface of the Ceiling for Gluing Polystyrene Tiles
IF YOU HAVE Chosen Such a Material as Polystyrene Tiles a Finish of the Ceiling Surface, You Will NEED to Pre -PrePare the Base On Will Stick. Initially, It Will Be Necessary to Dismantle Lighting Devices from the Ceiling, and the Move On to the Preparation of the Surface Itself. So If the Wallpaper Is Glueed, They Must Be Removed, And in the Case When The Ceiling Is Painted or Whitewashed, You Need to Check it for Strength. For Example, You can do this by gluing adheesive tape on it, Aftera it Breaks Down with a Sharp Movement. IF The Tape Remains Clean, and there Are No Coating Particles on it, The this is sitable for gluing tiles. Otherwise, You Will have to comletly Clean The Ceiling from the Existing Coating. Plus, The Base Must Be Dry, That is, if the Surface Was Aligned Using Plaster or Putty Mixtures, Thy Ned to Give A Certain Time to Complete Drying Out. ALSO, The BASE MUST BE MADE QUITE EVEN, EVEN DesPite the FACT THE TIT THE TILE HIDE SOME FLAWS. Such Irregularites as, for Example, Concrete Influxes that Prevent The Shower Cabs From Putting it, It Will Be Necessary to Remove and Grind IT, and Its Advisable TO ALIGN THE CR Acks and Joints of the Floor Slabs with Putty. As an adhesive composition for Polystyrene Foam Tiles, You Cane Both A SPECIAL GLUE RECOMMENEDED BY THEAFACTURER FOR ITS FIXATION, As well as Which Also Can Cope with this Task. Apply the Adhesive Composition to the Back of the Tiles Can Be Pointed, Since It Has a Slight Weight. The Most Important Thing in this Process is good to press the Canvas to the Surface of the Ceiling. To Exclude Random Damage to the Tiles Usually Resort to the Help of a Wooden Bar, Which IS IDentical to Its SIZE.