In the Installation of a Monolithic Staircase, The Most Difficult Moment in the Construction Is the Installation of FormWork, It Must BE MADER To Fill In a Concrete Solution Solution AT A T IME. To make a FormWork for Direct Marches, You Need Two Boars for the Bowstring On the Sides of 20 CM Wide. Now You Need to Mark the Size of the Steps on the Inner Plate, Inter You Need to Nail the Bars for the Suport of the Approaches of the Approach. If the staircase is not wide, The Average Support (Board) Can Not Be Installed. Well, if the stars are wide en fee, the midle board needs to be installed in the most of the Formwork Pegs. They Must Be Driven Into the Base, After the Falling Off the Pegs Are Cut Off with A Hacksaw and the Rest Is Plastered. The Base of the Stairs Should Be Under the Slope, It Consists of a Layer of ReinForcement, Rubble, Bromen Brick and Slag, All this is compacted and Poured Not by A Large AMOUNT F Water. Когда укладывается бетон, то нужно сделать не большой уклон проступи, это нужно для того чтобы вода могла стекать.