How to glue the glass -gathering gluing the glass, degrease its surface with any solvent. Then, on both glued surfaces, it is necessary to apply a layer of glue, giving in the future, dry it for 10 minutes. After that, another layer of glue is applied to the first layer, which is dried for 3 minutes, and only after that it is necessary to combine the glued parts. In order to get flat gluing seams when gluing glasses of glass, it is necessary to press the parts to each other before the seam hardening — for this, use rubber bundles (can be clamps). Squeeze glued items at least 20 minutes, and seams completely grasp for 24 hours. Closing glass with metal use such waterproof glue as «unique». In this case, the surface of the glass must be degreased, and the surface of the metal intended for this purpose must be thoroughly cleaned of the rust available on it, and then also degreased. During gluing, both metal and glass must be dry. If in this way you glue the aquarium, then water can be poured into it only after three days after the details were glued.